Description
Hydraulic Precision Leveling Machine
FEATURES
High Precision Leveling
Leveling accuracy reaches ±0.015 mm, eliminating 99% of wavy lines and internal stress.
Stepless Pressure Regulation
Equipped with 16 hydraulic cylinders, with pressure ranging from 0.5–250 MPa, suitable for different plates.
Dynamic Compensation & Deviation Correction
Dual-sensor system optimizes the pressure curve every 0.02 seconds and solves head-and-tail errors.
High Speed & High Efficiency
Feeding speed is 35 m/min. Leveling efficiency is 2 times higher than the gear type, with daily processing capacity exceeding 80 tons.
Energy Saving & Environment Friendly
Hydraulic energy-storage recovery saves 40% energy and more than 150,000 yuan in annual electricity costs.
Easy Maintenance
Modular oil circuit allows key valve groups to be replaced within 20 minutes. Standard oil monitoring helps avoid 70% of oil-related failures.
Technical Parameter
HD63 Series Leveler Parameters
| Parameter | Specification |
|---|---|
| Roll Diameter | Φ63 |
| Working Width | 500, 800, 1300, 1600, 2100 (Customizable) |
| Number of Rolls | Upper 10 + Lower 11 = 21 Rolls (Standard) |
| Rated Leveling Thickness | 1.2–5 mm |
| Max. Leveling Thickness | ≤13 mm (The thicker the plate, the narrower the width) |
| Min. Leveling Length | 126 mm (2× Roll Diameter) |
| Leveling Speed | 0–10 m/min |
| Leveling Accuracy | Grade H and below |
| Applicable Materials | Coils, Plates, Flat Parts, Mirror-finish Sheets, etc. |
HD63 Series Leveling Width Range Table
| Thickness/Width | 63-500-21 | 63-800-21 | 63-1300-21 | 63-1600-21 | 65-2100-21 |
|---|---|---|---|---|---|
| 1.2–5 | 500 | 800 | 1300 | 1600 | 2100 |
| 6 | 400 | 660 | 1080 | 1330 | 1700 |
| 8 | 300 | 500 | 810 | 1000 | 1300 |
| 10 | 250 | 400 | 650 | 800 | 1050 |
| 12 | 200 | 320 | 510 | 640 | 850 |
| 13 | 180 | 300 | 480 | 580 | 780 |
Four-Hi Type
Roller System A
Common Leveling Requirements Are Satisfiable
Four-Hi Type Performance and Features
- Leveling roll uniform distribution of force
- Good rigidity structure, small deformation, high leveling accuracy
- School flat surface quality is good, smooth transmission, low noise
- Suitable for carbon steel and stainless-steel plate
Diagram Labels: Standby Bearing, Leveling Roller
Six-Hi Type
Roller System B
No Roller Imprint Exists
Six-Hi Type Performance and Features
- Leveling roll uniform distribution of force
- Good rigidity structure, small deformation, high leveling accuracy
- School flat surface quality is good, smooth transmission, low noise, no creasing
- Single three-layer roll: support bearing, intermediate roll, leveling roller
- Suitable for carbon steel and stainless-steel plate
Diagram Labels: Standby Bearing, Intermediate Roller, Leveling Roller
Reviews
There are no reviews yet.